Cyanoacrylate

Purpose: In this experimental study, a sutureless scleral buckling was performed by using a tissue adhesive glue to fixate a silicone band to the sclera. In fact, one of the major risks of traditional scleral buckling is accidental perforation of the bulb, which is more frequent when the sclera is extremely thin as it is in newborns or in eyes with high myopia or scleromalacia.

Purpose: In this experimental study, a sutureless scleral buckling was performed by using a tissue adhesive glue to fixate a silicone band to the sclera. In fact, one of the major risks of traditional scleral buckling is accidental perforation of the bulb, which is more frequent when the sclera is extremely thin as it is in newborns or in eyes with high myopia or scleromalacia.

Polyalkyl 2-cyanoacrylates begin to retropolymerize and deteriorate dramatically at temperatures above 80°C. They bond rapidly to the metal surfaces and readily lose strength even at ambient temperatures. These two drawbacks of the cyanoacrylates have made this class of adhesives unpopular as structural adhesives. Several attempts have been made to increase the thermal stability and the stability of the bond between the metal surfaces by adding chemicals like cyclopentadienoates and anhydrides to the cyanoacrylates.

The mechanical properties of the adhesively bonded joints with ethyl-2-cyanoacrylate and ethyl-2-cyanoacrylate modified with poly(methylmethacrylate) were determined. The modifier lowers tensile stiffness, increases deformability and relaxation of the adhesive bond and improves impact resistance. A morphological structure similar to an interpenetrating network system is suggested which arises from the rapid polymerization of the solvent. The results obtained may be helpful for the design of joints with cyanoacrylate bonding.

Abstract BACKGROUND: The powder reaction moulding process uses a reactive monomer as carrier and binder for the moulding of metal or ceramic powders. De-binding is achieved using thermal depolymerisation which is followed by sintering to give the finished component. Binder can be recovered for re-use. RESULTS: Moulding compounds, with various powder volume fractions, have been prepared using stainless steel, silicon nitride and alumina with n-butyl cyanoacrylate as binder, and the stability of the compounds established.

Near-IR reflectance spectroscopy has been used to study the curing of ethyl cyanoacrylate adhesive on polished dental glass and microscope slide substrates. The effects of changing the glue film thickness and the type of substrate on the curing rate have been investigated whilst maintaining a constant humidity. The FTIR spectral data has been used to calculate and plot the extents of cure versus time for various film thicknesses.

Non-invasive surgery techniques and drug delivery system with acoustic characteristics of ultrasound contrast agent have been studied intensively in recent years. Many ultrasound contrast agents are commercially available, and they are usually composed of a microbubble coated by a surfactant or lipid bilayer, i.e., a hollow microsphere. We show that the hollow microsphere with polymer shell can be fabricated just blowing vapor of commonly-used instant adhesive into water as microbubbles.

The processing of advanced materials such as refractory ceramics and metallic alloy powders has been investigated intensely over the past two decades. Ceramic injection moulding has therefore become a prime method for manufacturing complicated parts from a robust material. Typically, powder is dispersed within a thermoplastic carrier (or binder) before it is moulded at high temperatures and pressures. Further removal of the binder by thermal or solvent degradation methods yields a component that is suitable for sintering.

The biocompatibility of two cyanoacrylate surgical glues (Glubran and Glubran 2), supplied by General Enterprise Marketing, Viareggio, Lucca, Italy, was tested through cytotoxicity and blood compatibility tests and the evaluation of antimicrobial activity. Cytotoxicity and blood compatibility tests were performed on the polymerized glues. Using the neutral red uptake test, the extracts from Glubran and Glubran 2 after polymerization were non-toxic to L929 cells only when diluted 1 : 10 with culture medium.

Odontoblast-like cells derived from human tooth pulps were maintained in expiant culture and grown either on glass coverslips only (used as control) or on glass coverslips coated with cyanoacrylate films. Ultrastructural and cyto-morphometric evidence showed that cells exposed to cyanoacrylate, in contrast to controls, display a significant decrease of rough endoplasmic reticulum and mitochondria. In addition, immunofluorescent staining and radioimmunoassays for type-I collagen suggested disturbances in production for the exposed cells.